Metal gutters roof: price, features and installation

Water can have a devastating impact on almost all types of building materials, to the detriment of their appearance and characteristics. To avoid such influence when it comes to contact with rainwater on the facade of the house, use the special drain system. Let us see what are the advantages of metal gutters roof: price, variety and characteristics of this type.

What elements is organized from the roof gutter

What material would consist of any drainage system, it includes several elements, each of which has its own purpose and must be perfectly suited to the conditions in which used. Briefly, the component parts can be listed as follows:

• Drain trough;

• funnel;
• pipes;
• plugs;
• knee and turns;
• mesh to prevent debris from falling into the gutters;
• various fasteners: clamps, pins, connectors for pipes, brackets.

Galvanized steel gutters are the most popular, as in the question of durability and reliability are fully capable to meet the requirements of the average user. At the same time with the ability polymer coating, have a variety of colors, allowing you to choose the right option for any home. Although copper design yet reliable, galvanized gutters are the undisputed leaders.

How to install gutters on the roof depending on the type of roof

Before you install the gutter, you need to understand what type of roof will work and what will have to observe the nuances of installation. For example, in the case of a flat roof is allowed to use the special drain funnels, which are installed directly in the ceiling hole. Fall into the water for them tubas descends and enters the stormwater system.

However, take care of a gutter system is required in advance to another stage of construction of the flat roof, it was possible to provide for special slopes to drain points. They will allow rain water to fall directly into the funnel. If the roof has a parapet, the water drainage will be carried right through it with the help of horizontal funnels for roofing - skapperov. Passing therethrough, the water enters the tube.

Useful advice!internal drainage system of rain - is extremely effective, especially when it comes to building a house in cold regions. This allows you to get rid of the most common problems - freezing the water inside the gutter system.

Very different and more accustomed to looking water drainage system for pitched roofs. In this case, the outer gutter, which includes a trough for holding corresponding to the rainwater pipe.

What drains better: plastic or metal

The main competitor of metal gutters - plastic construction, which have much lower cost, and therefore - attract buyers looking to save money. Consider what kind of option is preferable: plastic or metal drain? And is it worth to save on the purchase of such an important system as a waterspout.

The first thing that the interests of consumers - as far as plastic systems are inferior in strength of metal, and will not be whether this difference cause an early exit from the system, if they prefer a cheaper option. Here it is worth paying attention to the features of fasteners. Thus, the clamps for fastening the metal gutter, able to withstand a static load of 180 kg. In addition, in this case a rigid mounting system, which means the immobility of all design elements.

Elements of a plastic gutter attached rather loosely, since this material tends to expand as a result of heat exposure. Simply put, in cold or warm weather, pipes and gutters will be resized so that the attempt tight fit very soon lead to the deformation of the entire drainage system.

Thus, metal gutters unquestionably stronger and more reliable plastic.

Another important criterion - the materials resistance to external factors. Plastic gutters are resistant on their own and can not be rusting. Corrosion processes are not able to occur, in principle, which makes the material an ideal option if you want to install in an aggressive environment. For example, this solution is perfect for a small house, situated on the coast, where high humidity and salt content in the air.

By itself, a metal which is more sensitive to external factors, however, due to the presence of the polymer coating, the properties of practically equalized. True owners of metal gutters will have to constantly monitor that on a system of elements was not scratched. If it is detected even the slightest damage, it must be removed immediately. But with proper care, the service life of such drains is not a dozen years.

Features installation of plastic and metal gutters roof

Despite the fact that, in general, the procedure for fastening elements is preserved regardless of the drainage material fixing method still different:

• for connecting plastic elements using special adhesives which allow inseparably bonding them together. This method is used for end caps, funnels, etc .;

• if you have to fasten metal parts, no adhesives with this task can not cope. In this case it is necessary to resort to the use of special locks or flexible petals.

It is believed that metal systems installation process is somewhat simpler in comparison with plastic. However, we can not say definitely. Much depends on the type of roof, with which we work, as well as the quality of items purchased.

Metal gutters roof: prices for various types of structures

At rates of metal drains influences the diameter and length of the pipe, and the type and quality of the metal used. For example, if the slope area is less than 50 m² is sufficient to troughs 100 mm wide and 75 mm diameter tubes. Roof from 50 to 100 m² recommended dimensions are slightly different - 125 and 87 mm respectively. For larger buildings, roofing area exceeding 100 m², gutters and pipes less than 150 mm and 100 mm in diameter simply can not cope with the task.

Also worth in advance to calculate the required number of fastening elements, as they have different cost and the sum can be a significant part of total expenditure on the improvement of the system. Recommended step for positioning brackets - 50-60 cm. For fixing of one pipe clamp take 2-3, provided that it is one-piece. If the composite pipe, then each part requires a separate clip.

metal drains to the roof: the pricefor the products of different manufacturers

Today, there are few of the most popular systems, which are in high demand when it comes to settling private homes. Among these proposals, each buyer can find an option that is suitable to him for quality and value. Consider the best of them.

Metal gutters aquatic systems - the average cost option. Price for 1 meter is 366 rubles. In this case, users report excellent product quality and leave mostly positive reviews.

Ruukki - a metal gutter, the price of which many seem unreasonably high. We can not say that this statement is not justified, given the fact that 1 MP It will cost about 594 rubles. However, those who are not used to save money and likes to get their money's worth of quality, will certainly appreciate this option properly.

As an alternative to expensive Ruukki can consider Vegastok drains. Their value is only about 147 rubles MP So it's a great option for those who do not plan to spend money seriously and prefers to opt for a budget option.

As can be seen from the above examples, buy metal gutters roof can be at very different prices. And say with certainty how it will affect its operation difficult. Much depends on the quality of the installation, as well as compliance with all recommendations of the system of care. In some cases, even the most simple and cheap it can drain properly serve for decades. And sometimes you have to deal with the fact that high-priced and high-quality items have been damaged during the installation process that eventually led to their failure.

It is for this reason it is recommended as it should think twice before venturing an independent unit. Of course, the price of drainage installation may seem excessive, given the simplicity of the process. However, it is important to understand that includes the price for the work.

Related article:

plasticroof drains for: price, features, review manufacturers

Review of popular manufacturers. How to install the gutter with his hands. heating systems gutters and drains.

Install gutter must be made properly, taking into account all the details and features of a particular roof.

Useful advice!Optionally, the trough can be done independently and, using the metal sheet and by bending their edges appropriately. For bending angles can use the bending machine.

Installation of metal gutter to the roof with his hands

Whether it is necessary to carry out the installation of drainage for the roof with his hands - a moot point, since on the one hand it's a great opportunity to save money, refusing to call the master. But at the same time, it significantly increases the risk of damage to individual elements of the system or incorrect installation, leading to additional costs. Therefore, independently engage in any labor can only be subject to availability of adequate experience and skills in this area.

Useful advice!Since fixing the roof drainage is carried out at high altitude, it is important to adhere to the safety rules and the use of ladders, scaffolding and forests.

Features self-assistance systems of various types

In order to drain the system to be fully operational, it is not enough just to fix each component part of the place where it should be located. It is important to know in advance what kind of slope should be from the drain, as well as the load, which will be subject to the system in case of rain. Thus, the slope drainage gutter should be 2.5-3 mm / m, and the number of funnels and pipes must be such that each accounted for at least 10 m trough.

For self-assembly is easiest to use a type of suspended structure, which involves mounting the gutter on special hooks along the eaves. This option is preferable, since the wall troughs, which are used to standing seam roofs - it is the task of professionals, which cover the roof of the house.

Although some owners involved in the construction of their own, and practice self-installation of such systems. But it is important to remember that in this case, setting the troughs necessarily must be made before the roof is laid a layer of waterproofing material itself and directly roofing.

Installation brackets need to start at the edges, keeping the necessary level of tilt. Then, to facilitate the process, between the end elements of the twine pull, which allows direct attach all intermediate attachment without resorting to repeated measurements.

Given the fact that the winter and spring to drain the load can be very high due to ice and snow, regardless of the characteristics of each embodiment of the system mounting, it is best to move between the brackets was small. If this is not possible, the experts recommend to ensure the availability of additional measures strengthening trenches.

One of the best ways to reduce the load on gutters considered installing heating systems. In this case, a special cable is laid, which melts snow and ice, allowing sediment to flow down.

How do gutter to the roof with his hands: step-by-step instruction

To start the installation of the system is possible only after all necessary measurements and calculations will be carried out. Having all the necessary data, the constituent elements of the system need to be decomposed into the earth to prepare them for the connection between them.

The first is to take care of the placement of sinks. To do this, cut out holes in the gutters, the edges of which are folded in such a way as to prevent debris engaging and fallen leaves.

Ideally for cutting elements of drainage systems need to use special scissors, which are designed to work with thin metal. This allows to keep a thin polymer coating integrity.

Useful advice!Used for cutting holes abrasive disc is not recommended, as this leads to overheating of the edges that can cause corrosion. But if you do use this method - the edges must be protected by covering them or primer coat of paint.

construction assembly, and in particular the installation of sinks and fixing them in the gutter, as is done on the ground. After that, the assembled structure is hung on brackets and securely attached. At this stage must be secured inside the discharge holes protective nets which serve to prevent the ingress of foreign objects into the system.

By means of special connectors attached angles. However, for their retention still use two separate bracket that increase structural strength. It is very important to take care of the reliability of each compound to prevent possible leakage. To do this, is to adhere to these simple rules:

• each next part of the gutter should be invested in the previous overlapping of 20-30 mm;

• provide additional sealing allow special sealants or rubber seals;
• distance from the blind area to the drain knee should be at least 30 cm.

Given the fact that the most popular are rectangular metal gutters roof, pay attention to the method of bonding the constituent elements of each other. For this purpose, special rivets. With their help attach and auxiliary systems: angles and plugs.

Useful advice!In order to ensure the evenness of placing the downspout, you can use the plumb line.

If you do not take into account the features of the site, according to the table it is clear that the most cost-effective building is a house, built with the use of frame technology.

Installation of drainage for the roof with their own hands: video-User

In order to keep the water flowing down from the roof, do not cause harm to the foundation and are not eroded local area, you must buy a gutter. Metal or plastic - it's a personal decision each homeowner that takes effect on the basis of the advantages and disadvantages of a particular system. But it is important to understand that no matter what choice is made, quality installation - the key to long life and safety of the drain gutter, roof and facade of the house.